Selection of high-quality imported soft silicone material, made use of advanced technology, non-slip comfort when worn, not easy to yellow, better durability and corrosion resistance with easy yellow color, etc., nose and paste to make contact with the skin surface frames is not easy sliding. At present, the market various brands of plate frames tend to be large box sweeping design; nose stickers can be a good solution like wearing plate frames but suffer from the bridge of the nose or nose width can not hold up glasses trouble. The nose pads and very simple to use adhesive prior to use, be sure to washed and air-dry or wipe clean, then paste the operating parts of the nose pads to avoid residual water stains, oily and dirty glasses nose pads position trace, because of the stickiness and persistence of residues on direct impact. Nose and paste before the paste operation, please do not immediately open the glue surface, should be the amount you need to paste the location of, decided that a good adhesive position and then torn off stickers directly on the sticky. Try one operation adhesive nose pads adhesive side is not secondary operations, and to do so would greatly reduce the adhesive firmly. There are two adhesive method: The first is: adhesive coated Apply to parts of the original nose pads shorter frames, stickers when large tracts of part of the booster role, paste it into the frame nose pads lateral, small pieces of reinforcing part is over and affixed to the inside of the nose pads to elevate and growth of the nose pads effect. Second: single-sided adhesive Applicable to a wide frame of the original nose pads site, you need to tune the narrow frame. Paste with scissors before subtracting the nose pads and a small piece of reinforcing part torn off stickers, large tracts of part affixed to the nose pads lateral to the role of non-slip and padded nose pads AM Landen® is US registered trademark owns by AM Landen Enterprise and sold by authorized dealers only. Read More..